Cleaning Your Cricut Imagine ™ Machine; Additional Basic Care Tips - HP Cricut Imagine Benutzerhandbuch

3. Find the identification symbol on the print cartridge and locate the print car-
tridge latch which has the same symbol.
4. Hold the new print cartridge with the copper contacts facing the printer, and
then slide the print cartridge into the cradle.
note: If you have trouble inserting the print cartridge after lifting the cartridge
latch, verify that the printer is on and wait a few seconds for the carriage to disen-
gage before inserting the print cartridge.
5. Push down on the print cartridge latch until it snaps closed. Make sure the latch
does not spring back open.
6. Close the print head cover.
Cleaning your Cricut Imagine
WArnInG! Always unplug your Cricut Imagine
To clean the Cricut Imagine
cloth. Immediately dry any excess moisture with a chamois or other soft cloth.
Do not use chemicals or alcohol-based cleaners (including, but not limited to,
acetone, benzene, and carbon tetrachloride) on the machine. Abrasive cleansers
and cleaning tools should also be avoided. Do not immerse the machine or any
component of it in water.

Additional Basic Care tips

• Keep away from food and liquids.
• Keep in dry, dust-free location.
• Avoid excessive heat or cold.
• Do not leave in car, where excessive heat may melt or damage
plastic components.
• Do not expose to direct sunlight for any extended period of time.
22 BASIC CARE
Machine
™
machine, gently wipe exterior panels with a damp
™
before cleaning!
™