Protective Device - Klarstein 10029117 Handbuch

Special instruction concerning protective device
1. When the water in the barrel is full, the device begin to work.
moment. The machine will make a noise which indicates the motor is running at a high speed. Under this
circumstance, you should cut off the electricity, clean out the water. Then equip the machine and turn it
on, it will begin to work normally.
2. When the machine was overturned, the device will become to work. You should cut off the electricity and
make it upright, then check if water has entered the motor. Let the appliance dry.
3. When the device is working,the motor will be damaged and cause fire if you use the machine. Under this
circumstance, you should stop using and clean out the water,then you can begin to use.
If you want use the socket function, please open the lid. Then insert the plug into the socket.
Depending on the position of the switch, the vacuum cleaner is switched on or off :
I
The socket is not electrified. The vacuum operates.
O
The socket is electrified. The vacuum is switched off.
The vacuum cleaner is switched off. If the plug is being used by an external device,
the vacuum cleaner starts to operate after 5-8 seconds. If the plugged device is being
II
switched off, the vacuum cleaner will run for another 5-8 seconds. This is particularly
helpful when using a drilling machine.

Protective Device

Socket Function
The suction power will vanish at this
16