Operation - Klarstein 10004395 Bedienungsanleitung

A. Switch and plug diagram behind your watch winder.
B. Battery – remove the battery cover on the bottom of the unit, and attach 2pcs Size D 1.5V battery
to the snaps
Setting Program Information Setting Program Information
STOP
The unit is off .
PROGRAM 1
On this setting, the winder will turn clockwise only, turning 1 minute and resting for
20 minutes, then repeating cycle.
PROGRAM 2 On this setting, the winder will turn counter-clockwise only, turning 3 minutes and
resting for 50 minutes, then repeating cycle.
PROGRAM 3
On this setting, the winder will turn counter-clockwise for 2 minutes and rest for 28
minutes then will turn clockwise for 2 minutes and rest for 28 minutes, then
repeats complete cycle.
5

Operation

Knob Switch Setting Knob Switch Setting