Klarstein 10030512 Hinweise Seite 12

Change Filters
• The new filter must remove the polybag
first.
• Get the filter out of the machine.
• Remove the polybag, write down the first
date on the blank place in the label which
can indicate when the filter was started to
use on the machine.
Assemble the Air Inlet Grid
• With the left hand holding the bottom of the air inlet grid,
and use the thumb of right hand holding the noose of the
air inlet grid.
• Push the bottom buckle of the air inlet into the oblique
groove. With left hand pressing the buckle and pushing the
grid into the machine, until the grid is well settled.
• The used filter should be abandoned with polybag wrap-
ped, in case of polluting the environment.
Cleaning Method
• Ensure pulling out the plug before cleaning.
• Do not clean the appliance body by corrosive chemical reagent, such as petrol, thinner and alcohol. Wring
up wet cloth and then to clean the appliance body.
• The front panel can be removed and cleaned by water.
• HEPA filter CAN NOT be washed by water. It can be cleaned by vacuum cleaner or replace a new filter.
12