Version Display
Contrast Adjustment
16
Chapter 3 Operation
When Version is selected in Menu screen, the following screen appears,
where you can confirm the autoloader model, SCSI ID and firmware version.
1
Note the displayed information.
2
Press the EJECT button.
The display returns to the Menu screen.
When Contrast is selected in Menu screen, the following screen appears. You
can adjust the display contrast from this screen.
1
Press the ENTER and SELECT buttons, as necessary, to adjust the
contrast.
2
Press the ENTER button.
The contrast setting is accepted and the display returns to the Menu
screen.
T S L - A 3 0 0 C
S C S I I D # 5
V e r . 0 0 0 0
Version Screen
C o n t r a s t
A d j u s t m e n t
pppππππ
Contrast Adjustment Screen
Model Name of this Machine
SCSI ID Number
Firmware Version