Inhaltsverzeichnis
Werbung
7. Move the upper blade of the grass blades so that the middle
line of the plastic ring is positioned exactly in the centre of the
hole.
8. Place the four locking holes of the grass blades onto the four
locking pins on the gear carriage. Make sure that the cam of
the gear wheel completely snaps into the plastic ring.
9. Warning! Do NOT operate the switch before the blade cover
is installed. Risk of injury!
Turning ON and OFF
Before switching on the grass and hedge
shears make sure the safety disabling
device (5) is inserted in place.
1. To turn the grass and hedge shear on,
press the safety switch (4) forwards and
then press the ON/OFF switch (3) in-
wards. To turn off the grass and hedge
shear, release the ON/OFF switch.
2. Use less pressure when trimming. Do
not force the shear while trimming. Use common sense while
working.
If the charging indicator lamp lights up red, the battery is
spent and has to be charged.
Do to carry the grass and hedge shear with the fingers on the
safety switch and on the ON/OFF switch.
Using the Wheel Assy (Optional)
1. Press the wheel assy in the
grass and hedge shear until
the assy locks audible. On both
sides of the housing you will
find two notches. Make sure
Operation
24
8
Werbung
Inhaltsverzeichnis
