Grundig XACT MC 7240 Bedienungsanleitung Seite 28

OPERATION ______________________________
Cut the hair in a relaxed and
7
slow manner. Use short strokes,
working gradually over the en-
tire head.
Take care when using close to
7
the ears, eyes and face.
Always take off a little hair at a
7
time, you can always trim addi-
tional hair later.
While cutting, hair may collect
7
on top of the cutting comb. Fre-
quently and gently shake excess
hair from the trimmer, in order to
maintain the speed of the motor.
For best results, use on clean,
7
dry hair that has been combed
or brushed in the direction of
growth.
Trimming beard
1
Adjust the trimming length by
using the adjustable combs
or or the blending combs
K
or .
I
2
Adjust the cutting/thinning selec-
tor as desired.
B
3 Turn on the appliance by press-
ing the on/off switch
–  T he motor starts running and the
speed setting touch
controls
28 ENGLISH
J
H
.
F
light up.
E
4 Move the blade
direction of hair growth. Apply
only a slight pressure when
cutting with slow, gentle move-
ments.
5
Turn off the appliance by press-
ing the on/off switch
Notes
If the appliance is blocked by
7
thick hair during use, switch it off.
If using it in mains mode, unplug
the mains adapter at the socket.
Remove comb attachment
or and clean the blade
J K
and the comb attachment
or with the supplied brush.
K
J
If the cutting blades move slowly
or not at all, remove the cutting
head by pushing the blade
wards. Clean the blade
the cavity in the appliance with
the cleaning brush provided.
For trimming contours, remove
7
the adjustable combs
the blending combs
Use the appliance without the
combs (cutting length is 1.5 mm).
against the
A
.
F
, ,
H I
A
, ,
H I
out-
A
and
A
or or
J K
or .
H I