Grundig XACT MC 7240 Bedienungsanleitung Seite 23

OPERATION _____________________________
Preparation
1
Remove all packaging and keep
safe for future storage.
2
Inspect the appliance before use
to ensure the blades are free of
hair, debris etc.
3
Before use, ensure that the trim-
mer is sufficiently charged or
plugged into the mains.
Charging
Notes
Before using the appliance for
7
the first time, the battery must
be fully charged, which takes
about 3 hours. The appliance
can remain on charge for longer
periods without damage or dan-
ger, but this should generally be
avoided. With a fully charged
battery, the appliance works
for around 45 minutes. Future
charging should also take ap-
proximately 3 hours.
When the battery becomes low,
7
the speed setting touch controls
start to flash.
E
The unit automatically switches
7
off due to deep discharge pro-
tection when the battery gets
too low. Never leave the adapt-
er plugged in when not in use.
1
Ensure the appliance is switched
off.
2 Insert the adapter cable in
socket , plug in the adapter.
G
– The speed setting touch con-
trols
while the batteries are being
recharged.
Note
Once the charging process is
7
complete, the speed setting touch
controls
3
To disconnect the adapter, al-
ways remove it from the wall
socket first before disconnecting
the jack from the appliance.
flash alternately
E
stay lit.
E
ENGLISH 23