Scope Of Delivery - Westfalia DIY-12 Bedienungsanleitung

DIY-12.book Seite 27 Dienstag, 27. März 2007 3:47 15
DIY-12
Observe the following installation instructions:
Secure the parts installed in the vehicle in such a way that they cannot
become loose under any circumstances (sudden braking, accidents)
and cause injuries to the occupants of the vehicle.
When drilling holes, make sure the drill bit will not damage anything on the
other side (fig. 1, page 2).
Deburr all drill holes and treat them with a rust-protection agent.
Observe the following instructions when working with electrical parts:
Only use a diode test lamp or voltmeter to test voltages in electric cables.
Test lamps with an illuminant consume voltages which are too high and
which can damage the vehicle's electronic system.
When making electrical connections, ensure that:
– They are not kinked or twisted
– They do not rub on edges
– They are not laid in sharp edged ducts without protection (fig. 2,
page 2)
Insulate all connections.
Protect the cables from mechanical wear (for example rubbing against
existing cables) using cable binders or insulating tape.
3

Scope of delivery

No. in
fig. 3, Quantity Description
page 2
1
2
1 Compact alarm unit
2 Remote control
1 Status LED with cable and socket
1 Installation material
Scope of delivery
Item number
DIY-12-TX
27