Intended Use; Product View; Safety Notices - Conrad 61 07 21 Bedienungsanleitung

O P E R A T I N G I N S T R U C T I O N S
Plug Adapter with Motion Detector
Item-No. 61 07 21

Intended Use

This plug adaptor can be used to activate a device connected to it via motion detection. The acti-
vation duration, motion detection sensitivity and brightness at which the connected device will
be activated when motion is detected can be set.
The adapter with motion detector is only suitable for dry indoor use.
Power is supplied by way of a 230 V/AC 50 Hz wall outlet
Any use other than that described above will damage the product and may involve other risks,
such as short-circuit, fire, electric shock. Do not change or modify any part of the product.
The safety instructions and technical data must be observed without fail.
This product complies with the applicable national and European specifications. All company
names and product names are trademarks of the respective owners. All rights reserved.
Scope of Delivery
• Plug Adapter with Motion Detector
• Operating instructions
Symbols
The lightning bolt icon in a triangle is used to alert you to potential personal injury
hazards such as electric shock.
The exclamation mark in a triangle indicates a particular risk in handling, operating
or controlling the product.
The "Hand" symbol indicates special tips and operating information.

Safety Notices

The guarantee/warranty will be void if damage is incurred resulting from non-
compliance with the operating instructions. We will not assume any respon-
sibility for consequential damage!
We do not assume any liability for damage to property or personal injury,
caused by improper use or failure
to observe the safety instructions. In such cases the warranty/guarantee is
voided.
• The unauthorized opening, conversion and/or modification of the product is inad-
missible because of safety and approval reasons (CE).
• The product is designed in conformity with protection class 2. The only voltage
source that may be used is the correct mains socket-(230V/50Hz, with grounding
conductor) of the public supply system.
• The product is not a toy and should be kept out of the reach of children. Particular
care must therefore be exercised if children are around. Children might try to put
objects through the openings of the power outlet for example. There is the risk of
a fatal electric shock!
• The adapter with motion detector is only suitable for dry indoor use.
• Never touch the product or the mains plug to be connected to the front socket with
wet or damp hands. There is a risk of fatal electric shock!
• Never pull a plug inserted in the adapter's front socket at the cable. Always pull
the plug from the front socket in the adapter by the gripping area provided on the
side.
• Do not overload the product (observe connection power as indicated in the tech-
nical data at the end of these operating instructions!).
• Do not leave packaging material unattended. It may become a dangerous toy for
children.
• Handle the product with care. It can be damaged by impact, blows or when
dropped even from a low height.
www.conrad.com
Version 12/09
°

Product view

5) "AUTO/ON/OFF" Slide Switch
6) Front socket
Information on the Site of Operation and Motion Detection
• If the product housing is damaged, do not use the product any more! If still con-
nected to the mains, do not touch the adapter with motion detector or any con-
nected device. Switch off the mains outlet to which the adapter with motion detec-
tor is connected first (switch off the circuit breaker). Then you can remove the
adapter with motion detector from the mains socket. Take the product to a spe-
cialist workshop or dispose of it in an environmentally friendly way.
• Live components may be exposed if covers are opened or parts are removed
unless this can be done by hand. Terminals may also be under power. If the appli-
ance needs to be opened for calibrating, servicing, repairing or replacing parts or
assemblies, it must be disconnected from all power sources first. If servicing or
repairs inside the appliance are necessary, this must be carried out by a special-
ist who is familiar with the risks involved and with the relevant regulations.
• It can be assumed that safe operation is no longer possible if:
- the device shows visible damage,
- the unit does not operate any longer and
- the device has been stored under unfavourable conditions
or
- after exposure to extraordinary stress caused by transport
• In commercial institutions, the accident prevention regulations of the Employer's
Liability Insurance Association for Electrical Systems and Operating Materials are
to be observed.
• If the product is used at schools, training facilities, do-it-yourself or hobby work-
shops, it has to be supervised by trained personnel.
This slide switch selects the operating mode AUTO position = the connected device is acti-
vated by motion detection
OFF position = the connected device is always deactivated
ON position = the connected device is always activated.
For connecting a device
When selecting the position for installing your camera, please note that it
must not be subject to direct sunlight, vibrations, moisture and wetness,
dust, heat or cold. This may lead to wrong activation, failure or functional
impairment.
The motion detector is only suitable for dry indoor use.
Do not locate any devices with strong magnetic or electric fields, such as
mobile phones, electric motors, etc. in the immediate vicinity.
Recommended mounting or operating height: 1.5 metres.
1) "Time" Dial
With this rotary regulator, the length of
user activity, beginning at the point in time
where motion is recognized, can be set.
2) "SENS" Dial
For setting the motion detection sensitivity
3) Diverging Lens
4) "LUX" Dial
Dial for setting the brightness at which the
connected device will be activated when
motion is detected can be set.