Specifications; Projector Specifications - Yamaha DPX-530 Bedienungsanleitung

16

Specifications

◆ Projector specifications

The specifications and outside appearance of the projector are subject to change without prior notice.
Type
Model
Display Technology
Projection lens
Light-source lamp
Image size (Projection distance)
Maximum number of display colors
Maximum resolution Computer signal
Video signal
Component signal
Input terminal
Control terminal/Others
Operating temperatures
Rated voltage
Power consumption
Dimensions
Weight
Others S-video input
Video input
Component video
input
Analog RGB input
Digital RGB input
DLP™ projector
DPX-530
0.65-inch Single chip DMD (Aspect ratio 16:9)
Pixel 1024 × 576 = 589824 pixels
F 2.4 – 2.6 f= 23 – 27.6 mm
250 W
40" min. to 275" max. (Projection distance 1.3 to 10 m)
16770000 (full-color display)
Maximum resolution: 1280 x 1024 dots (Analog) / compressed
Panel resolution: 1024 × 576 dots
NTSC / PAL / SECAM / 4.43NTSC / PAL-M / PAL-N / PAL-60
480i, 480p, 576i, 576p, 720p, 1080i
Panel resolution: 1024 × 576 dots
[Signal type]
Analog RGB
Digital RGB
Video input
S-Video input
Component video input
RS-232C (8P): For service person
+41°F (+5°C) to +95°F (+35°C)
AC100 - 240V, 50/60Hz
3.5 A
360 mm (W) × 102 mm (H) × 290 mm (D) *Not including protrusions.
3.9 kg
Luminance signal: Vp-p=1.0 V 75Ω (negative sync)
Chrominance signals: Vp-p=0.286 V 75Ω (burst signal)
Vp-p=1.0 V 75Ω (negative sync)
YC C : Vp-p=1.0 V 75Ω (Y) (negative sync)
B R
Vp-p=0.7 V 75Ω (C , C )
B R
RGB: Vp-p=0.7 V 75Ω (negative sync)
HD: TTL-level (negative or positive polarity)
VD: TTL-level (negative or positive polarity)
DVI interface (TMDS single link)
[Terminal type]
D-SUB 15P
DVI-D
RCA × 1
S
RCA × 3, D-SUB 15P
[Line]
1
1
1
1
2
35