Westfalia 84 58 92 Bedienungsanleitung Seite 42

The saw blade should not be longer than required for the intended cut. A 4 cm
longer saw blade will avoid excessive kickback.
Note: Immediately switch OFF the pruner if the saw blade comes loose, is
crooked or damaged or if the saw blade jams. Slightly open the sawn split in
the workpiece and extract the saw blade. Do not try to finish the cutting
process with a jammed saw blade to avoid injury or damaging the pruner and
the saw blade.
Maintenance, Cleaning and Storing of the Pruner Attachment
For best performance, always keep the saw blade and the pruner in good
order.
 Before carrying out any work on the pruner, remove the pruner attachment
from the motor unit.
 To clean the blade clamp, slightly tap the pivoting shoe on an even surface.
To remove bigger cutting residue, clean the blade clamp with a paintbrush
or with compressed air.
 Do not allow liquids of any kind enter the pruner saw.
 Check that all screws and parts of the pruner are firmly secured in regular
intervals.
 Store the pruner attachment out of the reach of children and persons in
need of supervision.
The Pruner Attachment (Option)
4 cm
Saw Blade too short
38