Intended Use - Westfalia 84 58 92 Bedienungsanleitung

Pruner Attachment (Option, Article Number 84 66 10)
For this machine a pruner Attachment is available under the Article Number
84 66 10.

Intended Use

 The pruner has been exclusively designed for cutting wood. Avoid cutting
chipboard, plastics, PVC, fibreglass, drywall, sheet steel, iron, Aluminium
and similar materials.
 The intended use also includes an operation following the operating
instructions. Any use beyond these parameters (different media, applying
force) or any changes (reconstruction, no original accessory) can lead to
serious risks and is regarded as use that is contrary to the intended pur-
pose.
Before first Use
 Remove the pruner attachment from the packaging.
 Check all parts for damage in transit and do not use a damaged saw.
 Keep packaging materials out of reach of children. There is risk of
suffocation!
Attaching the Pruner Attachment
 Hook the pruner attachment into the motor unit and press it into position,
until it snaps into place.
 To remove the pruner attachment, press the release buttons on the sides
and detach the pruner attachment from the motor unit.
The Pruner Attachment (Option)
36