Height Adjustment According To Pile Type; Switching On And Off - Westfalia VC9610S-2 Bedienungsanleitung

Height Adjustment according to Pile Type

With the pile height adjuster (9) you can set the height of the brushing roller. Only
adjust the pile height when the device is switched off in order to avoid injuries
resp. damaging the device.
When cleaning hard floor such as laminate, tiles, PVC etc. set the pile height
adjuster completely to the left in direction to SHORT PILE. First test on a hidden
place on the surface to be cleaned to make sure the brushing roller does not
damage the surface.
When cleaning
carpets, runners, etc, turn the
pile height adjuster one step
further in clockwise direction.
If you want to clean medium-
pile carpets and runners, set
the pile height adjuster to the
centre position.
When cleaning carpets and
runners, turn the pile height
adjuster one step further in
clockwise direction
completely to the position HIGH PILE.

Switching ON and OFF

Switch on the vacuum cleaner by pressing the ON/OFF switch (2)
and not by pulling out the power cord from the socket.
As soon as the vacuum cleaner is switch on the brushing roller
rotates. Adjust the pile height adjuster only when the device is switch
off. There is risk of injuries!
When switching off the vacuum cleaner, fold up the handle to make
sure the vacuum cleaner is in the storage position.
Always pull the power cored if you do not use the vacuum cleaner.
Start up
short-pile
HIGH
PILE
or
19
SHORT
PILE