Inhaltsverzeichnis
Werbung
2. Press the PLAY/PAUSE key (8) again to continue playing the CD.
3. Press the STOP/PRESET DOWN key (9) to interrupt the playback completely. The display indicates the
number of tracks and the total playing time of the CD.
Selecting a Track
1. Press the SKIP key
I (11) while the CD is playing to select the next track.
2. Press the SKIP key I
(11) while the CD is playing to skip to the beginning of the track or to the pre-
vious track.
Selecting a Section of a Track
1. Press and hold the SKIP key
I (11) while the CD is playing to select a section within a track quickly.
The device starts a fast forward scanning.
2. Press and hold the SKIP key I
(11) while the CD is playing to select a section within a track quickly.
The device starts a fast reverse scanning.
MIX (Random) Function
1. Press the STOP/PRESET DOWN key (9) to stop playing the CD.
2. Press the MIX key (6). The display indicates "MIX".
3. Press the PLAY/PAUSE key (8) to start the random playback. The tracks of the CD now are played in
random order.
4. Press the MIX key (6) to deactivate the random function.
Programming the Order of Tracks of a CD
1. Press the STOP/PRESET DOWN key (9) to stop playing the CD.
2. Press the PROGRAM/MEMORY key (7), the display indicates "00" P-01" and the "PROGRAM" indica-
tion is flashing.
3. Press the TUNNING/SKIP key
I or I
4. Press the PROGRAM/MEMORY key (7) to confirm.
5. Press the TUNNING/SKIP key
I or I
6. Press the PROGRAM/MEMORY key (7) to confirm.
7. Repeat the steps 3 and 4 until all desired tracks are programmed.
8. Press the PLAY/PAUSE key (8) to start playing the CD. The display indicates "PROGRAM".
9. Press the STOP/PRESET DOWN key (9) to stop the programmed playback.
10. If now you press the PLAY/PAUSE key (8), the normal track order will be played. However, the pro-
gramming still is available. For this, the "PROGRAM" indication is flashing on the display.
11. To start playing the programmed track order again, press the PROGRAM/ MEMORY key (7) in stop
mode and then the PLAY/PAUSE key (8).
12. The programmed track order will be deleted when opening the CD compartment or pressing the
STOP/PRESET key (9) in stop mode.
You can program up to 20 tracks.
30
(11) to select the first track.
(11) to select the second track.
Connection of the speaker cables:
• The wiring to the speakers has to be a two-core wiring.
• Make sure that the cables cannot be damaged due to sharp edges. Avoid short-cir-
cuits.
• Only use the enclosed speakers.
• Please ensure correct polarity! The red terminal is the positive pole and the black ter-
minal is the negative pole.
Connect the speaker terminals of the main unit and the speakers with correct polarity. To open and to close
the speaker terminals of the main unit, please shift the red or black plastic nose. To open the speaker ter-
minals of the speakers, please press the red or black plastic nose.
Put the bared speaker cable into the opening and release the plastic nose. The speaker cable is clamped
and a secure contact is guaranteed.
Speaker terminal
SPEAKER L + red terminal
SPEAKER L – black terminal
SPEAKER R + red terminal
SPEAKER R – black terminal
Mains connection:
Put the mains plug of the mains cable into a 230V AC / 50 Hz
mains socket.
Connection of the AUX input or SUBWOOFER output:
• Only use appropriate shielded cinch cables for the connection of the cinch input and
output. If other cables are used, disturbances might occur.
• To avoid distortions and mismatchings which involve damaging of the device, only
connect sources with an audio cinch output to the input.
• The AUX input (14) is not equipped with an integrated PHONO equalizer. Therefore, do
not connect a record player to this input.
• Connect an appropriate audio source (e.g. MD) to the AUX input (14). Please ensure correct channel
assignment (R/L).
• To the mono
an active subwoofer can be connected via a cinch cable.
SUBWOOFER output (26)
Inserting/Replacing the Batteries
Do not leave batteries littered because children or pets might swallow them. In case of
batteries being swallowed call for immediate medical care!
Leaky or damaged batteries might cause cauterization when in contact with the skin;
therefore, use suitable protective gloves.
Do not short-circuit batteries.
Never try to recharge batteries. Do not throw them into fire because they might explode!
Do not leave used batteries inside the remote control or the device, because even leaka-
ge-protected batteries might corrode and release chemicals that are hazardous to the
health and might damage the battery compartment. Remove the batteries from the bat-
tery compartment if you do not use the remote control for a longer period of time.
Speaker cable
left speaker grey marked cable
left speaker black cable
right speaker grey marked cable
right speaker black cable
27
Werbung
Kapitel
Inhaltsverzeichnis
