Description Of The Appliance En - Kärcher AD 3.000 Bedienungsanleitung

Wait until the ashes have cooled down
–
before you begin with the cleaning. We
do not recommend extinguishing the
fire rapidly with water. The chimney ma-
terial will not withstand the quick tem-
perature changes and may crack.
Continuously check hoses and vacuum
–
cleaner for heat while vacuuming ash-
es. If you notice a temperature rise,
switch off the vacuum cleaner immedi-
ately. Pull out the mains plug. Remove
the vacuuming material from the ash
and dry vacuum cleaner. Allow device
to cool down outside under supervision.
Completely empty the container before
–
and after vacuuming ashes.
The use of dust collection bags is not
–
permitted.
Electrical connection
The appliance may only be connected to al-
ternating current. The voltage must corre-
spond with the type plate on the appliance.
Risk of electric shock
Never touch the mains plug and the socket
with wet hands.
Do not pull the plug from the socket by pull-
ing on the connecting cable.
Check the power cord with mains plug for
damage before every use. If the power cord
is damaged, please arrange immediately
for the exchange by an authorized custom-
er service or a skilled electrician.
To avoid accidents due to electrical faults
we recommend the use of sockets with a
line-side current-limiting circuit breaker
(max. 30 mA nominal tripping current).
Caution
Certain materials may produce explosive
vapours or mixtures when agitated by the
suction air!
Never vacuum up the following materials:
Explosive or combustible gases, liquids
–
and dust particles (reactive dust particles)
Reactive metal dust particles (such as
–
aluminium, magnesium, zinc) in combi-
nation with highly alkaline or acidic de-
tergents
Undiluted, strong acids and alkalies
–
Organic solvents (such as petrol, paint
–
thinners, acetone, heating oil).
Hot, burning or glowing objects with
–
temperatures greater than 40°C. Tem-
peratures above 40°C represent a fire
hazard.
Not suitable to separate health-hazard-
–
ous dust (dust classes L, M, H).
In addition, these substances may cause
the appliance materials to corrode.
Description of the Appliance
Illustrations on fold-out page!
When unpacking the product,
make sure that no accessories are missing and
that none of the package contents have been
damaged. If you detect any transport damages
please contact your dealer.
Suction hose connection
 To connect the suction hose during vac-
uuming.
(see description / illustration
ON/OFF switch for appliance
 Position I: Suction operations
Position 0: Appliance is switched off
(see description / illustration
Carrying handle
 Transport the appliance using the carry-
ing handle.
Cable hook
 To store the mains cable.
(see description / illustration
Container closure
 Pull out to open, push in to lock.
(see description / illustration
– 7
EN
)
)
)
)
13