Switching The Oven On And Off 51 - NEFF B 1693 Serie Gebrauchsanweisung

Before you switch on your oven, decide
which heating system you would like to
use.
Switching on the oven:
1. Press the middle of the rotary control
slightly so that the knob pops out.
2. Press the required function button (see
illustration – example shows Hot-air
160º C).
You can select a different oven
function by pressing the function
button more than once.
The preferred temperature setting
blinks in the display, and the oven
light illuminates.
You can increase or decrease the
proposed temperature in 5º C steps
by turning the rotary control while the
arrows are still flashing (see Baking or
Roasting Tables for temperature
settings).
The oven switches on automatically
after 3 seconds.
To change the selected oven
temperature, first briefly press the
Function button.
The dough-proving setting
permanently set temperature and
cannot be changed. –
displayed.
EasyClean ® system is a permanently
set temperature and cannot be
changed.
*
See the "Defrosting and cooking"
section for adjusting the "defrost"
setting.
Switching the oven ON and OFF
S
is a
– is
{
is displayed.
Example: Hot air
Heating-up monitor
Temperature display
Heating-up monitor:
The heating-up monitor indicates how
far the oven has heated up.
If the set temperature is not reached, a
signal is emitted and the top light
changes from red to green.
If the top light changes from red to
green, a signal is only emitted during the
initial heating-up phase.
51