Westfalia F548 Bedienungsanleitung Seite 22

Maintenance, Cleaning and Storing
The overload valve and the safety valve (8) of the floor jack are adjusted by
factory to make sure that maximum load of 2.25 T is not exceeded. The floor jack
will not lift up heavier load. Never adjust these valves. Adjustments have to be
made by hydraulic professional services only.
Fill in oil, if only the hydraulic is lowered. Please note: Too much oil will stop the
function. Use only hydraulic oil. Never use brake fluid or other liquids. Check the
floor jack before and after each use if there is oil leakage.
All moving parts have to be lubricated regularly. Use only acid-free lubricants.
Do not store the floor jack outdoors and keep it away from moisture, cold and
heat. Lower the floor jack completely before storing it.
When using the floor jack for the first time after long storing period, first remove
dirt and than lubricate all moving parts with an oily cloth or spray.
17