Westfalia F548 Bedienungsanleitung Seite 21

Using
Lowering the Vehicle
Make sure that no persons or obstacles are near the vehicle before lowering it.
Open the release valve (7) slowly in order to make sure that the vehicle is low-
ered slowly. Open the release valve only with the pumping handle and do not use
any tool such pliers in order not do damage the release valve.
Please note: Open the release valve by turning not more than one turn at the
utmost. If the vehicle is lowered, remove the floor jack. Press the saddle with your
foot down in order to lower the floor jack completely.
If the lifting arm (4) does lower completely, there might be air in the system.
Before using the floor jack next time, carry out bleeding process.
Overload Valve and Safety Valve
For additional safety the floor jack is equipped with
an overload valve and a safety valve (8) which are
adjusted by factory. Never intend to adjust these
valves.
8
16