Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
26
Features:
1.
Instant heating: under this working mode, after heating to the set
temperature value, it will transfer to the warming state, and when the current
water temperature drops to the value of 8 °C lower than the set value [set
temperature (-8 °C), it will start heating to the set temperature again, and
keep the cycle going.
2.
Anti Bacteria: under this mode (the temperature is not adjustable), the system
will enter the heat preservation state after heating to 80 °C, and return to
instant heating after 30 minutes of heat preservation.
3.
Anti-frost: Under standby mode, when the temperature of the water in inner
tank is lower than 5°C, the anti-frost heating function will be activated, and the
"Heating/heat reservation" function light will flash at 1 Hz, and the heating
will stop when heated to 10 °C and go to standby. If the device is on, the
system will heat in normal mode.
4.
Timing: set the appointment water time via APP, and the water heater would
heat to the set value before the appointment time.
5.
Smart Mode: The system would memorize the user's three-day water
consumption habits and automatically adjusts the set temperature.
6.
Failure and protection: When there are dry-heating failure, sensor failure,
over-heat failure, the digital screen displays the corresponding failure code,
the electric water heater willt immediately disconnect the electric heating
elements power supply, any button operation is invalid. Only after fixing the
failure with power off, then turn on power again, can the fault protection
function be quit.
Werbung
