Panasonic EYFMH1WC Bedienungsanleitung Seite 67

2.2 USING THE TOOL MANAGER SOFTWARE
2.2.10 SETTING OPTIONS FOR THE TOOL
You can set the following tool options from the Tool Manager software.
• Tool Information (Serial)
• Maintenance Interval Alarm (Pulse Time)
• Clock
1
Open the tool info window.
Select the tool (①) being connected on the tool list or the device setting icon (②),
and click [Tool Info].
① ●
2 Set the Tool Information.
You can set the Tool Information (serial number) from the tool info window.
1. Enter an eight-digit serial number in the serial number input field (①).
(The serial number is printed on the tool's color plate.)
2. When you select [Set Serial Number] (②), the newly set tool information will be
registered to the tool.
① ●
Note
• By checking [Change] in the item of [Model], you will be ready to change the tool model
number information registered in the tool being connected.
This function is used only when a wrong model number is registered to the tool because
of the replacement of circuit components or other reasons.
CAUTION
• The tool may not deliver its true performance, if you register any model number
different from that on the rating label of the tool.
EN
② ●
- 67 -
● ②
Color plate
Continued to the next page