Panasonic EYFMH1WC Bedienungsanleitung Seite 22

2.1 BASIC OPERATION
2.1.4 TIGHTENING CONFIRMATION LAMP AND COMMUNICATION LAMP
You can check the tightening result and the communication status by seeing the LED
lamps on the tool.
Communication Lamp Display
Lamp display
Blinking fast
Blue
(0.2 s cycle)
Blue Lit continuously
Blinking fast
Blue
(0.2 s cycle)
Blinking slowly
Blue
(1 s cycle)
Blinking
Blue (0.2 s cycle) +
buzzer
Blinking slowly
Blue
(1 s cycle)
－
Off
EN
Meaning of display Details
When the communication lamp is blinking
fast, some communications have taken place
inside the tool or between the tool and external
Communicating
devices.
Do not pull out the USB cable or the battery
pack until it goes out.
While the tool is connected with the Tool
USB connected Manager software on your PC or tablet, the
communication lamp lights up.
The communication lamp blinks fast while
Pairing in progress
pairing is in progress.
Reconnection in The communication lamp blinks slowly while
progress reconnection is in progress.
The communication lamp starts blinking slowly
(0.5 s cycle) after pairing is completed.
After pairing is completed, the tool enters a
Pairing completed
"Waiting for a wireless signal" or a "Wireless
operation prohibited" state at a command from
the controller.
Waiting for a The communication lamp blinks slowly while the
wireless signal tool is in the wireless communication mode.
Wireless operation The tool's operation is disabled by an operation
prohibited prohibition signal from the controller.
- 22 -
Communication lamp