Hitachi HT-324 Serviceanleitung

@HITACHI
SERVICE MANUAL
SPECIFICATIONS
Type 2-speed
Platter
Aluminum
diameter
Motor 4-pole
Speed 2 speeds, 33-1/3
SIN 65 dB (DIN.B)
Wow & Flutter 0.06%
Effective length 220
Overhang 15 mm
20
Tracking error
Adjustable force range
(scale) O — 3 g/ 1 turn of the balance weight
(directly
Acceptable cartridge
weight 4—10
Lead wire capacitance 140 pF
Accessory HITACHI
cartridge
Cartridge Dual magnet type (MT -30)
FEATURES
1. Smooth belt drive
2. Handy automatic mechanism
3. Easy-to-operate front panel controls
Design and specifications subject to change without notice for further
improvement.
belt drive system
alloy die-cast, 310 mm outer
synchronous motor
and 45 rpm
WRMS
mm
readable in 0.1 g steps)
g
BELT DRIVE
April
English
Deutsch
Francais
Frequency response 10 — 25,000
Output voltage 3 mV at I kHz 50 mm/sec.
Channel difference 1 dB at 1 kHz
Channel separation 20 dB at 1 kHz
Tracking force 1.5 — 2.5 g (recommended
Stylus tip Diamond
120 V 60 Hz for U.S.A.
Power source
220 V 50 Hz for
240 V 50
1
Latin
Power consumption 9 watts
D imensions 435 (W) x 375 (D) x 128 (H) mm
(17-1/8
4.5 kg (10 lbs.)
Weight
Auto return,
Other devices
force direct-reading
damped cueing,
4. Employment of the low center of gravity tonearm
5. Structure resistant to howling
6. Viscous damped arm lifter never damagesstylus tip
TURNTABLE
1979
H T —324
No. 171
Hz
2 g)
stylus (DS-ST 30)
& Canada standard
Europe standard
Hz for U.K. & Australia standard
V 50/60 Hz for Asia
America countries
x 14-3/4 x 5")
auto cut, anti-skating, tracking
balance weight, viscous
&