Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Suction Control on the Cleaner
The suction control (7) on the cleaner can be adjusted continuously from the
position MIN (Minimum) to position MAX (Maximum). Before cleaning, set a lower
setting and adjust if necessary.
Accessory
For the different varieties of use attach the accessories (19 + 20) on the attach-
ment hold (18) of the telescope tube (16
available.
Upholstery Brush (19):
pivoted
Crevice Tool (20):
Emptying the Dust Container
1. Empty the dust container in due time, to maintain the strong suction power of
the unit.
2. Switch the vacuum cleaner (6) off and pull the power plug (5).
3. Simultaneously press the release button (2) on both sides of the suction
opening (1) and lift the dust container lid (10) as far as it will go in order to
snap the lid.
You do not need to remove the suction hose, but if you do so, handling will be
easier. You can also check, if hair or lint blocks the opening and remove them
if necessary.
4. Lift the dust container (4) out of the housing.
5. Empty the dust container (4) over a bin or a similar container outdoors. Press
the release button for the dust container bottom. The bottom will open and the
dust can drop down.
6. Place the hook on the bottom side of the dust container handle (3) into the
notch of the housing. Close the lid (10). Make sure that the lid locks audible to
close firmly.
7. Attach the suction hose.
All manuals and user guides at all-guides.com
Attaching and Operation
For curtains, draperies and other fabrics, for furniture,
lamps, ceiling fans and fixtures
For crevices and corners for sucking under and be-
tween cushions
)
, to have the accessories always
12
Werbung
