Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SPECIFICATIONS
Type
Platter
Motor
Speed
Speed change system
S/N ratio
Wow and Flutter
Speed deviation
Speed drift (for time)
(for temperature)
Pitch control range
33-1/3 rpm
45 rpm
Tonearm
Effective length
Overhang
Tracking error
Lead wire capacitance
Adjustable force range (scale)
Acceptable cartridge weight
When a HITACHI cartridge is attached.
Cartridge
Frequency response
Output voltage
Channel difference
Channel separation
Tracking force
Stylus tip
Power source
Power consumption
Dimensions
Weight
Other devices
2-speed direct drive automatic system
Aluminum alloy die-cast, 310 mm outer diameter
Brushless, DC servo direct drive motor
2 speeds; 33-1/3 and 45 rpm
Electronic change-over system
75 dB (DIN-B)
0.08% WRMS
0.003%
0.003% /hour
0.003%
(5 — 35°C)
(HT-41S only)
ie)
394 ¢ (HT-40S only)
220 mm
15mm
De
140 pF
0-—3 g/1 turn of the scale ring (directly readable in 0.1 g steps)
4—
10g
Dual magnet type (MT-35)
10— 25,000 Hz
2.5 mV at 1 kHz 50 mm/sec.
1 dB at 1 kHz
23 dB at 1 kHz
1.5 — 2.5 g (recommended 2 g)
Diamond stylus (DS-ST35)
120 V 60 Hz for U.S.A. and Canadian standard
220 V 50 Hz for European standard
240 V 50 Hz for U.K. and Australian standard
120/220 V, 50/60 Hz for Asian and Latin American countries
6 watts (HT-40S)
5 watts (HT-41S)
435 (W) x 365 (D) x 110 (H) mm
(17-1/8" x 14-3/8" x 4-5/16")
5.5 kg (12.1 Ibs.)
Auto-return, auto-cut, anti-skating, tracking force direct-reading
balance weight, stroboscope (HT-40S only) or quartz locked in-
dicator (HT-41S only).
Design and specifications subject to change without notice for further improvement.
Werbung
