10 electrolux
Rear spacers
Inside the appliance you find two
spacers which must be fitted as shown
in the figure.
Slacken the screws and insert the spacer
under the screw head, then retighten the
screws.
Door reversibility
Before carrying out any operations, remove
the plug from the power socket. To change
the opening direction of the door, proceed
as follows:
• To carry out the following operations, we
suggest that this be made with another
person that will keep a firm hold on the
doors of the appliance during the opera-
tions.
• Open the door with the appliance in the
upright position. Unscrew the screws and
remove the upper door plastic trim.
• Remove the little plastic cover from the
door plastic trim and refit on the opposite
side (d).
• Lay down the appliance back side down.
All manuals and user guides at all-guides.com
• Remove both covers of the hinge (3) .
• Unscrew the upper hinge and remove it
• Unscrew the screw and remove the door
• Remove the door.
• Remove using a tool the cover (F), un-
• Re-insert the cover (F) on the opposite
d
(1-2).
stopper (4).
3
screw the screw and remove the lower
hinge (E).
side.
d
2
1
4