CoolFun TD26
5
Technical description
The cooler is suitable for mobile use. It can cool goods up to max. 18 ° under
ambient temperature or keep them cool.
Its cooling system is a non-wearing Peltier cooling, the heat is discharged by
a fan.
5.1
Description of the device
Your cooler consists of the following parts (fig. 4, page 4):
No. in
Description
fig. 4
A
Lid
B
Vents
C
Container
D
Handle
E
ECO switch
F
Connection sockets (on the back of the lid)
G
Air inlet opening
6
Operation
!
CAUTION! Health hazard!
Food may only be stored in its original packaging or in suitable
containers.
NOTE
I
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the chapter "Cleaning and care" on
page 21).
A few water drops may form inside the cooler if it has been cool-
ing for a lengthy period. This is normal because the moisture in
the air condenses to water when the temperature in the cooler
falls. The cooler is not defective. Wipe it out with a dry cloth if
necessary.
EN
Technical description
19