Zanussi ZBA3224A Benutzerinformation Seite 50

Ha
Hc
Push the part Hc on the
part Ha.
Hb
Hd
Press the part Hd on the
part Hb.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic sealing strip is attached tightly to the
cabinet.
Important! If the ambient temperature is low (for
example, in the Winter), the size of the gasket
50
8 mm
Ha
Hb
Open the appliance door
and the kitchen furniture
door at an angle of 90°.
Insert the small square
(Hb) into guide (Ha).
Put together the appliance
door and the furniture
door and mark the holes.
8 mm
K
Ha
Remove the brackets and
mark a distance of 8 mm
from the outer edge of the
door where the nail must
be fitted (K).
decreases. The size of the gasket increases when the
ambient temperature increases. You can also use a
hairdryer to increase the size of the gasket.
Hb
Place the small square on
the guide again and fix it
with the screws supplied.
Align the kitchen furniture
door and the kitchen fur-
niture door with the clear-
ance of the slots in the part
Hb.