Correct Positioning - Merax SC-76A Benutzerhandbuch

5. Correctly Positioning
Ventilation
For easy heat dissipation, low power consumption and maximum efficiency,
the refrigerator should be kept in a well-ventilated area. There should be
space of at least 100mm around the refrigerator and at least 200mm clear of
the roof. There should be enough space to allow the door to open 160
degree.
Power Supply
The refrigerator is only applied with power supply of single-phase alternating
current of (220-240) V~/50Hz; 230V~/60Hz). If fluctuation of voltage in the
district user is of so large that the voltage exceeds the above scope, for
safety's sake, be sure to apply A.C. automatic voltage regulator to the
refrigerator. The refrigerator must employ a special power socket instead of
common one with other electric appliances. Its plug must match the socket
with ground wire.
Power Cord
The cord should never be lengthened or folded or allowed to coil during
operation. The cord should never be kept close to the compressor or at the
back of the refrigerator as the surface temperature is always high when
operating. Any contact of the cord with the compressor could damage the
insulation or cause leakage.
10%10%+_50Hz60Hz
(+220-240)V~ 230V~
N
23