Putting On The Helmet - Shark RACE-R PRO GP 06 Benutzerhandbuch

PUTTING ON THE HELMET

Once the chin strap is released, you have to
take hold of the two sections by the buckles
and hold them slightly apart to facilitate
the passage of your head. While carrying
out this movement, you are advised to
keep the two
sections of the chin strap apart with your
thumbs so that they are properly positioned.
Position the protective parts of the chin
strap buckle correctly and fasten it in
accordance with the recommendations that
are appropriate to the versions and country.
Check that the tension and therefore the
positioning of the helmet are correct for all
positions. If this is not the case, you must
continue to adjust the length until you
achieve the ideal positioning.
REMOVING THE HELMET
Release the chin strap. Hold the two sec-
tions slightly apart as for putting the helmet
on and remove the helmet.
WARNING! If you cannot properly
fasten your chin strap or obtain the
correct fit of your helmet on your head,
DO NOT USE THE HELMET! See your
retailer for assistance.
7