In The Case Of Improper - Dantherm Master CCX 4.0 Benutzer- Und Wartungshandbuch

en
►►1. INFORMATION
REGARDING SAFETY
IMPORTANT:
UNDERSTAND
OPERATIONAL MANUAL BEFORE
ASSEMBLING,
OR PERFORMING MAINTENANCE
ON THIS APPLIANCE. INCORRECT
USE OF THE APPLIANCE CAN
CAUSE SERIOUS INJURY. KEEP
THIS MANUAL FOR
REFERENCE.
IMPORTANT: This appliance is
not suitable for use by persons
(including children) with reduced
physical, sensory
capacities or with lack of experience
or knowledge unless supervised
by a person responsible for their
safety. Children must be supervised
to make sure they do not play with
the appliance.
►1.1. Fill the appliance tank only with
clean water.
►1.2. Switch off and disconnect the
appliance from the mains before
filling it.
►1.3. Do not move the appliance,
once the tank has been filled.
►1.4. When using the appliance,
comply with all local regulations
and Standard in force.
►1.5. Keep the appliance dry, in order
to avoid electric shocks. Hands
must always be dry.
►1.6. Use only in ventilated and dry
areas.
►1.7. For indoor use only.
►1.8. Power the appliance only with
voltage and frequency as specified
on the data plate.
►1.9. Only use extensions with three
wires appropriately connected to
earth.
►1.10. Do not cover the appliance
with paper, cardboard, plastic, metal
Figures and texts of this book are protected by COPYRIGHT.
READ AND
THIS
COMMISSIONING
FURTHER
and mental
sheets or any other inflammable
material during use, in order to
prevent any risk.
►1.11. The appliance must be used
on a stable and levelled surface, in
order to prevent any risk.
►1.12. When it is not used, disconnect
the appliance from the power plug.
►1.13. Do not block the air vent or
the air outlet (front side) of the
appliance.
►1.14. The minimum safety distance
recommended
appliance and walls or other items
is 0,5 m.
►1.15. When
connected to the mains or running,
it must never be moved, handled,
topped-up or
maintenance operation.
►1.16. The appliance (power cable
included) must be kept at a suitable
safety distance from heat sources.
►1.17. In any case, the appliance
must be opened and/or repaired by
authorised after-sales centre.
►1.18. If the power cable is damaged,
it must be replaced by the technical
after-sales centre, in order to prevent
any risk.
►1.19. Rinse the case with clean water
and clean it before using, after the
period during which the cooler was
not in use.
►1.20. In the case of improper
operation of the product at the start,
disconnect itfrom the power supply
immediately and contact service
point.
►1.21. Protect the power supply cord
from damage as a result of movement
of the vehicles or pedestrians. The
connection of improper electrical
voltage or improper installation, will
cause the electrical shock hazard.
between the
the appliance
subject to any
is