Fulgor Milano FWC 4500 TCFO Anleitung Zur Installation Seite 23

INSTALLING THE WINE CELLAR WITH
WARMING DRAWER
To install the wine cellar above the 145 mm warming
drawer, it is necessary to install the brackets supplied with
the wine cellar between the two products.
To install, unscrew the 6 screws indicated in figure 1, in the
top part of the drawer.
FIG. 1
Place the supplied brackets on the drawer's top cover.
FIG. 2
Tighten the 6 previously removed screws, in order to secure
the brackets to the drawer.
FIG. 3
Place the wine cellar on top of the drawer.
FIG. 4
DIMENSIONAL DRAWINGS OF WINE
CELLAR WITH 145 mm DRAWER
140 mm
EN
1 mm
145 mm
7