Care And Maintenance - Hilti NURON SI-AT-22 Original Bedienungsanleitung

▶ To unlock the torque module, press the lockbutton
for at least 1 second.
▶ In the display a selection frame appears around the last previously
shown type of fastener and the last previously shown operating
mode.
▶ The torque module is unlocked and in setting mode. The impact
wrench is deactivated.
Navigation
When the selection frame and two or more elements (options, parameters)
are visible in the display, you can move the selection frame by pressing the
arrow buttons
Selecting options / changing parameters
▶ Position the selection frame on the element (option / parameter) you
want to change.
▶ Press the OK button.
▶ A black background appears behind the element.
▶ Use the arrow buttons to select the setting you want.
▶ Press the OK button to accept the setting.
▶ The element reappears surrounded by the selection frame.
Locking the module
When you have made all your changes you have to relock the torque module.
▶ Press the lock button
▶ The selection frame disappears. The adaptive torque module is
locked, the parameter settings have been saved and cannot be
changed accidentally.
▶ The impact wrench is re-activated.
6.3 Use of the torque module
For a detailed
qr.hilti.com/manual/?id=2343812&id=2343814
This link is also to be found at the end of the operating instructions, in the
form of a QR code.
7

Care and maintenance

WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance
tasks!
Care of the product
• Carefully remove stubborn dirt.
• Carefully clean the air vents, if present, with a dry, soft brush.
24 English
and .
.
description of operation,
2343812
and hold it down
follow this link:
*2343812*