If The Appliance Is Not Used For A Long Period Of Time; Troubleshooting - Amitek PG25L2 Handbuch Zur Installation, Bedienung Und Wartung


Checking the safety devices. At least once a day, before using the appliance, carry out a visual
inspection to verify the integrity of the safety devices and protections, if any. Also perform a
functional test of the safety devices and the start and stop elements of the appliance (by way
of example, check the correct operation of the safety micro switches, if any);

Verification of the labels and safety symbols integrity. At least once a week, carry out a visual
inspection to verify the integrity of the labels and safety symbols. In the event of illegibility or
detachment, request a copy of the labels and symbols from the dealer or qualified technical
assistance.
ATTENTION! In the event of malfunction, damage, breakage or failure of the safety
devices, immediately disconnect the appliance from the power supply and do not
use it. It is mandatory to contact the dealer to obtain qualified technical assistance.
ATTENTION! Servicing and repair activities must only be carried out by qualified per-
sonnel, using genuine accessories and spare parts.
Trying to repair the appliance by yourself is strictly forbidden and would result in the
immediate cancellation of the warranty while it could also lead to the risk of injuries.

6.4 If the appliance is not used for a long period of time


Disconnect the plug from the electric socket or, for plugless appliances, disconnect the appli-
ance from the mains power supply;

Carefully clean appliance and dry it;

Cover the appliance with a fabric sheet that allows air to circulate but at the same time protects
it from dust and dirt.

7. Troubleshooting

PROBLEM
When the thermostat is
activated, the heating
light does not come on
The appliance does not
heat up
The appliance is con-
nected to the mains, but
it does not work (only
PG25L2, PG25R2, PG35L2,
PG35R2, PG50L2 and
PG50R2 models)
The above cases are presented merely by way of examples of possible problems. In the event of
any problem, switch OFF the appliance immediately and contact the dealer.
Requesting spare parts:
To request spare parts, contact the dealer and refer to the part number, as indicated
in the spare parts drawings at the end of this handbook. At the same time, provide the
model and serial number of the appliance, as indicated on the technical specs. label
(ref. Pic.1 and Pic.2 - Section 8).
- 30 -
POSSIBLE CAUSES
 The electrical plug is not inserted into the
socket or the appliance is not connected to
the mains.
 Defective thermostat.
 The temperature has not been set on the
thermostat.
 Faulty heating element.
 The safety thermostat has been triggered.
SOLUTIONS
 Insert the plug into the electrical socket or
connect the appliance to the electrical
mains.
 Contact the dealer.
 Adjust the thermostat to the desired tem-
perature (paragraph 5.4 - Operation).
 Contact the dealer.
 Allow the appliance to completely cool down
to perform the reset of the safety thermo-
stat (paragraph 5.4 - Operation).
TRANSLATION OF THE ITALIAN ORIGINAL INSTRUCTIONS