Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2 Operation
2.1 Check the Battery Status
Do not remove the masking tape or plug from the battery. The masking tape can
prevent the battery from the water.
Please avoid direct contact with water or continuous exposure to sunlight.
Masking
tape
If the alarm indicator is on, refer to Section 2.4 LED Indicators, Section 2.5 Buzzer, and
Section 3 Troubleshooting to deal with the problems. During this operation, the battery
has no output.
During this operation, please cut off the output.
2.2 Using the Battery
2.2.1 Connecting the Battery to the Machine
When connecting the power cables, please pay attention to the positive and negative
terminals. Never mix up the positive terminals with negative terminals.
Avoid battery short-circuit during connection.
When connecting, insert the power plug into place and hear a "click" sound to avoid
false connection of the battery.
If it is connected to ePropulsion outboard motor, and the power cable or communication
cable is abnormally connected, the outboard motor will stop.
Before connecting the battery to the machine (outboard, etc.), make sure that the
battery power button is turned off and follow these steps:
10
Werbung
Inhaltsverzeichnis
Fehlerbehebung
