Music Playback Via Aux In; Storing The Headphones - Silvercrest SKHO 50 B2 Bedienungsanleitung

Music playback via AUX IN

You can use the supplied audio cable
Bluetooth
®
-compatible playback devices. In AUX IN mode, the headphones behave like
normal, cable-connected headphones and can even be used with an empty battery. The
Bluetooth
®
function is deactivated and the buttons on the
headphones do not function.
♦ Make sure that the headphones are switched off.
♦ Connect the audio cable
♦ Connect the audio cable
playback device.
♦ Switch on the playback device and set the volume to minimum.
Put on the headphones as described in the section Wearing the headphones.
♦
♦ Set the desired volume on the playback device.

Storing the headphones

Your headphones are fitted with swivelling earpieces
stored without taking up much space.
Proceed as follows to fold the headphones:
♦ Swivel both earpieces
You can now store the headphones in a space-saving way.
Fig. 1
SKHO 50 B2
w
to connect the headphones to non-
w
to the AUX IN socket
w
to the audio output (e.g. headphone jack) on the
2
so that they are inside the headband
8
of the headphones.
2
, allowing them to be folded and
1
(see fig. 1).
GB │ IE │
13 ■