■ Remove the milk tube. Dismantle the
top and bottom sections of the beverage
outlet�
■ Separate the milk tubes, connecting
element and suction pipe�
■ Clean the individual parts with a deter-
gent solution and a soft cloth�
■ Rinse all parts with clean water and dry
them�
■ Put the individual parts back together
again (see also the quick reference guide)�
■ Attach the beverage outlet directly from
the front firmly to the three connections.
■ Replace the cover.
Care and daily cleaning
Cleaning the milk container
For reasons of hygiene, the milk container
should be cleaned regularly� Only the
individual parts of the lid are suitable for
being cleaned in the dishwasher� Clean the
stainless steel milk container by hand with a
mild detergent�
L
Cleaning the brewing unit
(see also the Quick reference guide)
In addition to the automatic cleaning
programme, the brewing unit should be
removed regularly for cleaning�
■ Open the appliance door�
■ Use the mains switch J to switch off
the appliance completely�
■ Remove the protective cover of the
brewing unit�
■ Remove the coffee grounds container.
■ Slide the red latch on the brewing unit all
the way to the left j�
■ Press the eject lever right down� The
brewing unit will be released�
■ Take hold of the brewing unit by the
recessed grips and carefully remove it�
M
en
57