Technical Specifications - Xblitz XME PRO Bedienungsanleitung

to go to the previous track. Turn the knob clockwise to go
to the next track.
8. Moving between playback modes
Press the knob for 3 seconds to switch to FM broadcast
mode, then press it for 3 seconds to switch between
Bluetooth, SD and USB mode.
9. The USB-C port is a PD (Power Delivery) port, for the
charging function to work properly the cable must be
compatible with this technology.

05. TECHNICAL SPECIFICATIONS

Dimensions: 95x45x36 mm | Bluetooth version: 5.0
(range 10m) | Weight: 45g | Frequency: 87.5-108.0 MHz |
Charging: PD ports 27W, QC 3.0, 5V 1A | Ports: 2xUSB-A,
1x USB-C, micro SD memory card slot (max 64GB), AUX,
| Supported formats: MP3 APE FLAC WAV WMA | Power
supply: 12-24V | FM transmission: 87.5 -108 MHz | Ma-
ximum radio frequency power emitted in the frequency
range: 3.35 dBm | Frequency range: 2.402-2.480GHz
06. FAQ
1. Why doesn't the device turn on/steam automatically?
Some lighter models have a fixed electrical design.
The device cannot detect a change in voltage, so
it cannot be switched on. If this happens, simply
remove the Xblitz XME PRO and reinsert it into the
cigarette lighter.
2. Why is the music/sound from the phone poorly
audible?
Turn up the Bluetooth volume on your phone or
increase the volume of your car radio when playing
music/calls.
3. Why can't the device be switched on or it make a loud
noise after being used for a while?
Check if the contact point of the device and the lighter
are dirty, which can cause a weak signal. Remove the
10