Scope Of Delivery; Accessories; Intended Use - Dometic BUTTNER MT150PP Montage- Und Bedienungsanleitung

MT150PP, MT230PP, MT350PP, MT550PP

3 Scope of delivery

Quantity
1
1
1

4 Accessories

Available as accessories (not included in the scope of delivery):
Description
MT iQ Solar Monitor LED I
MT iQ Solar Monitor LCD II
MT iQ Solar Monitor LCD III
MT iQ SolarPRO
EBL connection cable kit

5 Intended use

The solar charge controller is intended to ensure the correct charging voltage of the vehicle batteries from solar
panels using microprocessor controlled IU0U charging programs and to protect the batteries against over voltage
and deep discharge.
The solar charge controller is only suitable for controlling solar modules.
The solar charge controller is not suitable for controlling other charging sources.
The solar charge controller is intended to be used to charge the following battery types:
• Lead acid batteries
• Lead gel batteries
• Absorbed glass mat (AGM) batteries
• LiFePO4 batteries
The solar charge controller is not intended to be used to charge other types of batteries (e.g. NiCd, NiMH, etc.).
The solar charge controller is suitable for:
• Installation in caravans and motor homes
• Stationary or mobile use
• Indoor use
The solar charge controller is not suitable for:
• Outdoor use
The energy output of connected solar panels may not exceed the maximum output stated in the technical data.
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor
installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible fail-
ure.
EN
Description
Solar charge controller
Temperature sensor
Installation and Operating Manual
Scope of delivery
Ref. no.
9620000230 (MT 71242)
9620000292 (MT 71250)
9620000328 (MT 01250)
9620000309 (MT 01240)
9620000196 (AK 34120)
15