Technical Specifications - cecotec CONGA HYDRO 3030 ACTIVE Bedienungsanleitung

Rust in the water tank
You cannot control the
steam level
The mop gets very wet
It stops working
FAQs
Question
Are the cleaning cloths washable and
reusable?
On which floors can I use the steam cleaner?
Do I need to activate the handle for it to
release steam or is it automatic?
Can I use a cleaning solution with the steam
cleaner or should I just use water?

7. TECHNICAL SPECIFICATIONS

Product: Conga HydroSteam 3030 Active
Model: 03250
1500W,220-240V ~, 50-60Hz
IP X4
Made in China | Designed in Spain
The tank has not been
emptied
The steam cleaner is off
Inadequate steam level
Misuse or problem with the
product
Answer
Yes, the micro-fibre cleaning cloths
are machine-washable. Use only liquid
detergents. For better results, do not use
softeners nor bleach. Allow the mop to dry.
Your steam cleaner is designed to clean
hard floors, like ceramic tile, vinyl, laminate,
marble, stone and sealed hardwood floors.
The use of the steam cleaner on waxed or
unwaxed floors may result in a decrease in
gloss.
The steam cleaner releases steam
automatically when you select the steam
level. You can select the steam level by
pressing the steam level button to clean the
floor: Low (delicate floors),
Medium (regular cleaning) and High (resistant
or sticky floors).
You cannot use cleaning solutions with the
steam cleaner. It is recommended to use only
distilled water to increase the steam cleaner
lifespan.
The remaining water in the
water tank must be emptied
before storing the device.
Press the On button and then
the steam control button.
Set a lower steam level.
Contact Customer Service:
CONGA HYDROSTEAM 3030 ACTIVE
ENGLISH
31