Nabo 43 KG6000 Bedienungsanleitung Seite 54

Balance: Adjust the left and right volume balance
for speakers and headphones.
Sound Surround: Turn the surround sound feature
on or off.
Equalizer Detail: Adjust the equalizer values ac-
cording to your preferences.
Speaker Delay: Adjust the delay value for speakers.
eARC: Set your eARC preference. Off and Auto
options will be available. Set as Off to disable.
Digital Output: Set the digital sound output prefer-
ence. Auto, Bypass, PCM, Dolby Digital Plus and
Dolby Digital options will be available. Highlight the
option you prefer and press OK to set.
Digital Output Delay: Adjust the digital output delay
value.
Auto Volume Control: With Auto Volume Control,
you can set the Display to automatically level out
sudden volume differences. Typically at the begin-
ning of adverts or when you are switching sources.
Turn this option on/off by pressing OK.
Downmix Mode: Set your preference to convert mul-
ti-channel audio signals to two-channel audio signals.
Press OK to see the options and set. Stereo and
Surround options will be available. Highlight the
option you prefer and press OK to set.
DTS DRC: Dynamic Range Control provides gain
adjustment of the source to maintain suitable au-
dible range at both low and high playback levels.
Turn this option on/off by pressing OK.
Dolby Audio Processing: With Dolby Audio Pro-
cessing, you can improve the sound quality of your
Display. Press OK to see the options and set. Some
other sound options may become unavailable and
appear as greyed out depending on the settings
made here. Set the Dolby Audio Processing option
to Off if you would like to change these settings.
Dolby Audio Processing: Highlight this option
and press OK to turn this function on/off. Some
options may not be available if this option is not
turned on.
Sound Mode: If the Dolby Audio Processing
option is turned on Sound Mode option will be
available to set. Highlight the Sound Mode option
and press OK to see the preset sound modes.
Game, Movie, Music, News, Stadium, Smart
and User options will be available. Highlight the
option you prefer and press OK to set. Some
options may not be available if this option is not
set to User.
Volume Leveler: Allows you to balance the sound
levels. In this way, you are minimally affected by
abnormal sound rises and falls. Turn this feature
on/off by pressing OK.
Surround Virtualiser: Turn the surround virtual-
iser feature on or off.
Dolby Atmos: Your Display supports Dolby Atmos
technology. By means of this technology the sound
moves around you in three-dimensional space, so
you feel like you're inside the action. You will have
the best experience if the input audio bitstream is
Atmos. Turn this option on/off by pressing OK.
Dialogue Enhancer: This feature provides sound
postprocessing options for speech-gated dialogue
enhancement. Off, Low, Medium and High options
will be available. Set according your preference.
Note: This feature has an effect only if the input audio
format is AC-4 or dolby audio processing is enabled. This
effect only applies to the Display loudspeaker output.
Dolby Atmos Notification: Set your notification
appearance preference for Dolby Atmos content.
When turned on, Dolby Atmos logo will be dis-
played on the screen when Dolby Atmos content
is detected.
DTS Virtual:X: This feature will enhance your sound
experience by providing a virtualisation of surround
speakers through your Display's speakers. High-
light Virtual:X and press OK. TruBass option will
become available. TruBass manages and enhances
low frequency signals. Highlight this option and
press OK to turn it on or off. Some other options may
become unavailable and appear as greyed out de-
pending on the setting made here. This item will not
be available if Dolby Audio Processing is turned on.
Reset to Default: Resets the sound settings to
factory defaults.
Storage: View the total storage space status of the
Display and connected devices if available. To see
detailed information on the usage details highlight
and press OK. There will also be options for ejecting
and setting up the connected USB storage devices
as device storage.
Migrate data to this storage: This option will
appear if you did priorly format your USB storage
device as device storage. You can use this option
to migrate some of the data stored on your Display
to your USB storage device.
Note: If you move data to your USB storage device, you
may need to plug in your storage device to use all your
apps and other content.
Eject: To keep your content safe, eject your USB
storage device before you unplug it from your
Display.
Delete & format as device storage: You can use
the connected USB storage device to extend the
storage capacity of your Display. After doing this,
that device will only be usable with the Display.
Follow the on-screen instructions and read the
English - 16 -