Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
USBC-110 USB-Charger with USB-C™ Power
Delivery
Item no: 2484526
1 Intended use
The product is a USB charger. Use the product to charge devices that support charging or
operation via USB-C™ or other standard USB sockets.
The product supports USB Power Delivery (USB PD) via the USB-C™ cable:
■
max. 20 V/DC, max. 100 W
The product is equipped with overload and short-circuit protections.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Charger
■
Mains cable
■
Operating instructions
3 Latest product information
Download the latest product information at
code shown. Follow the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by elec-
tric shock.
Protection class 2 (double or reinforced insulation, protective insulation).
This product must only be used in dry, enclosed indoor areas. It must not be-
come damp or wet.
This symbol indicates that the product meets the energy efficiency requirements
for Class VI.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
3
www.conrad.com/downloads
or scan the QR
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Operation
■
Do not short-circuit the USB ports/connectors.
■
Do not connect USB devices that have voltage and current requirements that the product
cannot satisfy.
■
The product gets hot during use. Ensure sufficient ventilation and never cover the
product during use.
■
Always turn off the USB devices before connecting and disconnecting them from the
product.
■
Disconnect the product from the power supply if not in use.
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Mains cable
Do not modify or repair mains supply components including mains plugs, mains
cables, and power supplies. Do not use damaged components. Risk of death by
electric shock!
■
The mains outlet must be located near to the device and be easily accessible.
■
Never plug in or unplug the mains plug when your hands are wet.
■
Never pull the mains plug from the socket by pulling at the cable. Always pull it from the
mains socket using the intended grips.
■
Unplug the mains plug from the mains socket if you do not use the device for an exten-
ded period of time.
■
Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
■
Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put
under mechanical stress.
■
Avoid excessive thermal stress on the mains cable from extreme heat or cold.
■
Do not modify the mains cable. Otherwise the mains cable may be damaged. A dam-
aged mains cable can cause a deadly electric shock.
■
Do not touch the mains cable if it is damaged.
– First, power down the respective mains socket (e.g. via the respective circuit breaker)
and then carefully pull the mains plug from the mains socket.
– Never use the product if the mains cable is damaged.
■
A damaged mains cable may only be replaced by the manufacturer, a workshop com-
missioned by the manufacturer or a similarly qualified person, so as to prevent any
danger.
■
Ensure that cables are not pinched, kinked or damaged by sharp edges.
■
Always lay cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
5.6 Connected devices
■
Also observe the safety and operating instructions of any other devices which are con-
nected to the product.
6 Operation
You can charge USB devices with different voltage and current requirements at the same
time. The charger adjusts charging voltage and current automatically.
Important:
The total load of all connected USB devices must not exceed the total power the charger
can supply (refer to section Technical data).
Preconditions:
a
The voltage and current requirements of the USB device are suitable for the charger
(refer to Technical data).
1. Switch off the USB device.
2. Connect the USB device to the charger. Use the USB-C™ cable on the charger or the
USB-A port and an appropriate charging cable.
3. Connect the mains cable to the power socket on the charger.
4. Connect the mains plug to a suitable mains socket.
à
The USB device starts charging.
5. (If charged) switch the USB device off, then disconnect it from the charger.
6. After use, disconnect the mains cable from the mains socket.
Werbung
Inhaltsverzeichnis
