Voltage Selector - Taurus Studio Glow 1500 Gebrauchsanleitung

Downloaded by: pd-oliana on 31-03-2023 14:10 CEST
EN
(Original instructions)
HAIR DRYER
STUDIO GLOW 1500
DESCRIPTION
A Body
B Filter
C Speed and temperatura selector
D

Voltage selector

E Hanging loop
F Concentrator
G Diffuser
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
USE AND CARE:
Extend unroll the appliance's power cable
before each use.
Do not use the appliance if its accessories are
not properly fitted.
Do not use the appliance if the accessories
attached to it are defective. Replace them
immediately.
Do not use the appliance if the on/off switch
does not work.
Unplug the appliance from the mains when not
in use and before undertaking any cleaning
task.
Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
Make sure that dust, dirt or other foreign
objects do not block the fan grill on the
appliance.
Keep the appliance in good condition. Check
that the moving parts are not misaligned or
jammed and make sure there are no broken
parts or anomalies that may prevent the
appliance from operating correctly.
Never rest the appliance into a surface while
in use.
Do not use the appliance to dry pets or
animals.
Do not use the appliance to dry textiles of any
kind.
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that all products' packaging has
been removed.
Ensure that the selected tension on the voltage
selector coincides with the tension of the
mains.
Some parts of the appliance have been
lightly greased. Consequently, the first time
the appliance is used a light smoke may be
detected. After a short time, this smoke will
disappear.
VOLTAGE SELECTOR:
The appliance has a voltage selector control,
situate the selector according to the type
of voltage available in the mains where the
appliance is to be connected. (Fig. 2)
USE:
Extend the cable completely before plugging
it in.
Connect the appliance to the mains.
Guide the appliance to direct the flow of air in
the desired direction.
Turn the appliance on, by selecting the desired
temperature and speed setting.
HOW TO DRY THE HAIR:
Move the appliance around in circles to
distribute the air along the hair.
For best results, we recommend selecting the
minimum power in the speed and temperature
selector.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Turn the appliance off by selecting the position
"0" of the speed and temperature selector.
Unplug the appliance from the mains.
Clean the appliance.