Functional Description - m-e Bell-556 TX Betriebs- Und Montageanleitung

GB
Bell-556 TX
RADIO CONVERTER
MOD. BELL-556 TX
GB
Please read the following instructions carefully and keep this manual for
future reference!
With this radio converter you can add a radio chime to your wired bell. When
the radio converter receives a signal (potential-free or 3-12V AC/DC signal), it
forwards it by radio to a doorbell receiver from the BELL or FG series. The
required 3 volt lithium battery (CR2032) is already installed. If necessary,
remove the battery isolation strip before putting it into operation.
This radio converter is designed for indoor operation only.

FUNCTIONAL DESCRIPTION

If the Bell-556 TX detects a signal on its connection lines, it sends a radio
signal to the receiver and the green transmission control LED lights up briefly.
The Bell-556 TX is equipped with battery monitoring and indicates an empty
battery by the red battery control LED flashing.
18