Cameo OTOS SP6 Bedienungsanleitung Seite 21

Ani. rot. 000 – 255 Animation Wheel Rotation
Blade 1A 000 – 255 Blade 1A 0% <-> 100%
Blade 1B 000 – 255 Blade 1B 0% <-> 100%
Blade 2A 000 – 255 Blade 2A 0% <-> 100%
Blade 2B 000 – 255 Blade 2B 0% <-> 100%
Blade 3A 000 – 255 Blade 3A 0% <-> 100%
Blade 3B 000 – 255 Blade 3B 0% <-> 100%
Blade 4A 000 – 255 Blade 4A 0% <-> 100%
Blade 4B 000 – 255 Blade 4B 0% <-> 100%
Rot. Blade 000 – 255 Blade rotation 0% <-> 100%
Pan / tilt macro 000 – 255 Pan/Tilt Macro
Pan tilt speed 000 – 255 Pan/Tilt Macro Speed
EDIT LOOP
Each of the eight available loops consists of up to eight scenes, which in turn can be edited
individually (Edit Scene 1 - 8). The number of steps, the steps themselves (Scene 1 - 8), the step
duration and the fade time can be set separately for all eight loops.
Starting from the main display, press MENU to enter the main menu. Using  and , select the
Control menu item and confirm with ENTER. Select Stand Alone, confirm, select Edit Loop,
select the desired loop for editing and confirm again.
This takes you to the submenu for setting the submenu items (see table, select with  and ,
confirm with ENTER, change value or status with  and  confirm with ENTER). The settings for
each loop are made separately and are retained even after restarting the device.
Edit Loop
User Scene 1 - User Scene 8
Step1 t-Step 0s - 20min
t-Fade 0s - 20min
User scene selection
Sets step time
Sets fade time
21