SICK GRL18 Betriebsanleitung Seite 21

4.5 Setting
8016955.1HT2/2022-11-11 | SICK
Subject to change without notice
Figure 2: Alignment
Sensor with potentiometer:
The sensitivity is adjusted with the potentiometer (type: 270°). Clockwise rotation:
Operating reserve increased; counterclockwise rotation: Operating reserve reduced. We
recommend setting the potentiometer to "Maximum". A lower operating reserve may be
necessary for depolarizing surfaces.
The sensor is adjusted and ready for operation. Refer to Graphics C and G to check the
function. If the switching output fails to behave in accordance with Graphic C, check the
application conditions. See section Error analysis.
(PNP)
1
q
0
1
0
Q
(NPN)
1
q 0
1
Q
0
Figure: C
Figure: G
OPERATING INSTRUCTION
O P E R A T I N G I N S T R U C T I O N | GRL18
en
21