Installation Of The Carbon Air Filter; Noises; Ventilation Requirements - AEG S93000KZM0 Benutzerinformation

16 www.aeg.com
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.
8.3 Installation of the carbon
air filter
On delivery the carbon filter is in a plastic
bag to maintain its duration and
characteristics. The filter should be
placed behind the flap before the
appliance is turned on.
The carbon air filter is an active carbon
filter which absorbs bad odors and
permits to maintain the best flavour and
aroma for all foodstuffs without risk of
odor cross contamination.
1. Open the flap cover (1).
2. Remove the filter from the plastic
bag.
3. Insert the filter in the slot found in
the back of the flap cover (2).
4. Close the flap cover.

9. NOISES

There are some sounds during normal running (compressor, refrigerant circulation).
During operation, always
keep the air ventilation flap
closed. Handle carefully the
filter so fragments do not
loosen from the surface.
1
2

8.4 Ventilation requirements

The airflow behind the appliance must
be sufficient.
min.
5 cm
200 cm
CAUTION!
Refer to the assembly
instructions for the
installation.
2
min.
2
200 cm