Inventum VVW6040AB Benutzerhandbuch Seite 51

5. If necessary, cancel a selected option by pushing the select button again until the corresponding indicator goes
off.
6. Push the start/pause button to start the program.
CHANGING THE PROGRAM
You can change the program while the appliance is running.
1. Push the start/pause button.
2. Wait until the program stops.
3. Use the program selector button to choose another program.
4. Push the start/pause button.
The newly selected program will resume the course of the previously selected program.
DELAYING THE PROGRAM
Note:
The start time of a program can be delayed for a maximum of 24 hours.
1. Push the timer button to delay the start time of a program.
2. Push the start/pause button.
3. Push the timer button to increase the time by 1 hour.
4. Push the start/pause button to activate the timer.
Note:
Set the time to 0 to cancel the timer.
The program will start when the timer has finished.
RESETTING THE PROGRAM
You can reset the program while the appliance is running.
1. Push and hold the start/pause button for 3 seconds. The program-step indicator End flashes.
The water inside the appliance drains in about 30 seconds.
2. Wait until the indicator on the on/off button comes on.
3. Push the on/off button to cancel the program.
ACTIVATING AND DEACTIVATING THE CHILD LOCK
Activating the child lock
1. Push the select button for 3 seconds to activate the child lock. All indicators flash and the display shows CL.
Deactivating the child lock
1. Push the select button for 3 seconds to deactivate the child lock. All indicators and CL on the display flashes
twice.
STOPPING THE APPLIANCE
Note:
The appliance is silent for 40 to 45 minutes during the drying process.
English • 51