Snap-On CT8810B Übersetzung Der Originalanleitung Seite 8

DOUBLE INSULATION
BACK FEED PROTECTION
PROPERLY RECYCLE BATTERY
DO NOT THROW IN GARBAGE
BC
CALIFORNIA –
TITLE 20 COMPLIANT
Battery Pack
Specifications
Type
CTB8185BK/CTB8187/CTB185 .......... Lithium-Ion
Voltage
CTB8185BK/CTB8187/CTB185 .............................
................................. 18 VDC (3.6 V x 5 cell pairs)
Weight
CTB8185BK/CTB8187/CTB185 .............................
................................................. ~1.5 lbs (0.68 kg)
Charge Time
CTB8185BK .............................................~60 min
CTB8187/CTB185 ....................................~90 min
Life
CTB8185BK/CTB8187/CTB185 .......... 1000 cycles
Note: 1 cycle=1 charge and 1 discharge
Discharge Temperature Range
CTB8185BK/CTB8187/CTB185 .............................
................................. -4°F(-20°C) to 140°F(60°C)
Battery Charger
Specifications
Input
CTC131/CTCA131/CTCEU131/CTCJ131 ................
..............................................100-240V, 50/60 Hz
Output
CTC131/CTCA131/CTCEU131/CTCJ131 ........5.0 A
USB Power Port ........................... 5.0VDC@0.5A
Weight
All models ............................... ~1.65 lbs (0.75 kg)
Charging Temperature Range
CTB8185BK/CTB8187/CTB185 .............................
.................................... 32°F(0°C) to 113°F(45°C)
ZCT8810BCE Rev. C
Operation
The Snap-on Cordless Impact Wrench is ideal for a wide
variety of fastener turning jobs in both the industrial and
automotive fields. When used with Snap-on impact
sockets, it provides power and speed for greater job
efficiency with less operator fatigue. The impact wrench
also adds the freedom of movement not usually available
with products requiring air hoses or electrical cords.
Application
Friction Ring Anvil
1. When installing an impact socket, place the forward/
reverse bar in the center position to avoid accidental
starting of the tool; or remove the battery pack.
2. Align the square of the socket with four flats at the
end of the anvil.
3. Push the socket over the friction ring, until it comes
to a stop.
4. To remove the impact socket, grip the socket firmly
and slip off the anvil.
This type of anvil is suitable for exchanging sockets regularly,
like in a garage environment.
Pinned Anvil
1. When installing an impact socket, place the forward/
reverse bar in the center position to avoid accidental
starting of the tool; or remove the battery pack.
2. Align the hole on the socket with the pin on the anvil.
3. Align the squares together and push socket onto the
anvil until the pin is in the hole of the socket.
4. To remove the impact socket, use a pointed object to
depress the pin through the hole. Then slide off the
impact socket.
This type of anvil is suitable for industrial usage, such as an
assembly line.
Quick Release Model - CT8810BQC
IMPORTANT
This model uses 1/4" hex accessories.
1. To install an accessory, pull the collar away from the
tool.
2. Insert the accessory and release the collar.
3. To remove an accessory, pull the collar away from the
tool and remove the accessory. Then release the
collar.
8
(03/20)