Klarstein 10009786 Bedienungsanleitung Seite 14

1. Charging Dock station
Power switch
Full go
Power adapter socket
Fernbedienung
Indicator
Auto
Wall-following
Leftward
Pause
Installation of the Charging Dock station
01. Place the charging dock station on level ground with the back against the wall.
02. Make sure that no obstacle and uneven ground in the area within 3 meters in front of the base
and 0.5m respectively on the left and right of it. (See figure 1)
03. Ensure that IR sending window on the base is clean without dust or something else covered,
otherwise, the function of self-charging will be influenced.
04. Connect the output plug of the adapter to the Power socket of the Dock Station. (See figure 2)
05. Tidy up the electric wire along the wall to avoid obstructing the operation of the Robot.
Installation and Disassembly of the Mopping part
01. Attach the enclosed mopping rag to the mopping holder. (See figure 1)
02. Align the protruding fastener at end of the holder (See figure 2) to the sunken positions on the
inner sides of the 2 wheels (See figure 3) and press them down. Then both ends of holder will be
locked
Clock
Adjuster
Timing
IR sending window
Charging terminals
Power
Docking
Spot
Forward
Rightward
Backward
UV button
Speed Adjuster
Cleaning Preparations
Figure 1
Floor skidproof pads
LED-Anzeige
Auto
Spot
Battery Power
High tension! Avoid
electric shock. Please
operate with a dry hand!
Figure 2
Digital display
Time
UV
Error indicator
Dirt indicator
14